Architecture + Construction · Laurentians
Frequently asked questions
Answers to the questions we hear most often about house plans, construction and how a project with AG3 unfolds.
01
Design and construction: two separate services
No. Design and construction are two separate services at AG3. You can hire us for your plans only and then choose the contractor of your choice, or hire us for the construction as well.
Yes. AG3 can act as general contractor on plans prepared by another professional. Send us your plans and we will discuss them.
One point of contact, from plan to job site. The team that designs your home knows every detail of the project when it is time to build it.
We take on a limited number of job sites each year to ensure close follow-up on each one. Our design service supports many more projects.
02
Process and timelines
File opening, site visit (on request), existing conditions survey, program (needs and budget), regulatory review, sketches, preliminary plans, then sealed plans for the permit and construction.
Timing depends on the scope of the project, the pace of your approvals and your municipality’s requirements. We set the schedule with you when we open your file.
Yes. The core service includes a complete, sealed set of plans for the permit application and for construction.
No. Beyond the core service, support is offered in à la carte packages: site and energy strategy, exterior visualization, interior design, technical coordination, construction drawings, and support through to the job site. Each package starts only after your approval.
Yes. 3D views of the massing, taken from our Revit model, are included. Photorealistic renderings and a flyover video are available as options.
Fill out the form on the Start a project page, describing your site and your needs. We will contact you for the next steps.
03
Site and construction
Yes, on request; it is not systematic. The house is designed for its site: orientation, sunlight, access and siting.
A design approach that uses the building’s orientation and window placement to capture the sun’s light and heat. Every window is considered from the sketch stage.
The envelope and insulation in our plans are designed to Novoclimat level at a minimum. AG3 is also a qualified Novoclimat contractor (No. 4038).
Yes. Regulatory review is included in the core service, before the sketches.
For design, our architectural technologists handle every building that Québec’s Architects Act allows to be designed without an architect. The limits apply to the building once the work is complete. Detached single-family home: no more than 2 storeys above grade and a single basement level, less than 6,458 sq. ft. (600 m²) of total gross floor area. Semi-detached or row house, plex of 4 units or fewer, low-hazard commercial, business or industrial establishment (or a combination): no more than 2 storeys above grade and a single basement level, less than 3,229 sq. ft. (300 m²). Agricultural buildings: according to the thresholds set for that type of building. For construction, we build new single-family homes, intergenerational homes, plexes, garages, additions and residential renovations.
As general contractor, AG3 coordinates the project’s land surveyors, engineers, urban planners and subcontractors.
RBQ 5787-1634-01, Garantie de construction résidentielle (GCR) 17376, Novoclimat contractor 4038 and Éco-entrepreneur certification.
We are based in Sainte-Agathe-des-Monts. We design new home plans for projects anywhere in Québec. For construction, we work in the Laurentians, on the North Shore of Montréal and in Lanaudière.
Is your project next?
Let’s talk about your site and your needs.
Start a project